Saturday, July 22, 2017

Steampunk Art Journal pages

Hello there! I've been working in my steampunk altered book art journal and have a few pages to share with you. (To see the original post about the making of the journal and cover, go HERE.) I've used some super cool steampunk stamps from Carabelle Studio, diecuts, transfers, stencils… all sorts of goodies. ;-)



I finally broke into my package of Tim Holtz Paper Dolls. Lots of fun in there! ;-) Underneath the gear die cuts on the right hand page I did some packing tape transfers from an old technical manual. The actual art journal is a repurposed children's book so on some pages I left the original illustrations peeking through the gesso.

Thanks for stopping by and be sure to check out all the cool stamps at Topflight Stamps, your one stop shop for utter wonderfulness brought in from stamp companies spread across the globe. They are always getting in new designs, my wish list can't keep up with them lol!

I am also entering this into the Summer Challenge over at SanDee & amelie's Steampunk Challenge blog. There is always cool stuff to see there!

Stamps Used:
Carabelle Studio - The Heart Has Its Reasons
Visible Image - Scripted Streets

Dies Used:
Sizzix - Gearhead

Other supplies:
Tim Holtz Paper Dolls 

Sizzix & Simon Says Stamp links in this post are affiliate links which do not affect the price you pay but allow me to earn a small percentage of a sale. Thanks! 

Tuesday, July 18, 2017

Get More Out of Your Dies!



Hello! We all like to get the most use possible out of our supplies and today I have an oldie but goodie technique for you to stretch your dies. I’m going to show you how to use them to make foam stamps and then use those stamps in a resist technique.





1. Apply a double sided adhesive sheet to the back of a piece of fun foam then die cut your shapes out of it. You don't have to use the adhesive, but it makes the next step super easy.



2. Peel off the paper backing of the adhesive sheet and stick each foam piece onto a square cut from plastic packaging. That's it for the stamps! Easy peasy right?



3. You can use the stamps with ink or paint. Here I used acrylic paint because the paint then acts as a resist when you mist or ink the shapes with water soluble media. (More on that in a minute.) Because these are small stamps, I used a paintbrush to apply a thin layer of paint to the stamps and then stamped the centers of my die cut flowers.



4. I used a few different mists on the flowers and once they were mostly dry, I used a baby wipe to clean the excess off of the stamped parts. It wiped right off!

BONUS TECHNIQUE!!
That's right, here's a different way to get more uses out of your embossing folders! You can use them to stamp too.





1. Use a brayer to apply a thin layer of silver paint to one side of the embossing folder. I placed the basket shape onto the painted side and carefully closed the folder, then gently pressed it to transfer the paint.



2. Once the paint was dry, I misted it and wiped the excess off the paint resist.

The rest is standard card assembly! ;-) Build the base and then arrange all the goodies in an aesthetic manner.

Thanks for stopping by! Head on over to Eileen Hull's blog for more techniques and inspiration. We also have an Eileen Hull group on Facebook. We share inspiration, ideas and techniques and you are welcome to join us! Just request to join and someone will add you quickly. It's a fun group full of nice and creative people. =)

Friday, July 14, 2017

Mermaid House



Hello there! I'm here with a mid-month project for our Altered Embellishments Challenge over at the Mixed Media Monthly Blog. You still have time to play! You can see my first project, a gardening binder, HERE. I thought the UmWowStudio chippies I had left looked like undersea flora and coral so I got the idea to make a mermaid house complete with garden.


Hang on to your hats, this is going to be a long post with lots of pictures!

Top Detail





I was able to remove the front glass panel so I could easily stamp a mermaid in the corner with archival black ink.



 After the tour, here come the tutorial tips:

1. When I'm thinking about filling a 3-dimensional space like a lantern, I usually make some mockups to rough out the spacing and proportions of what is going inside.

I used parts from Eileen Hull's Cookie Box die to form the base.

2. After hot gluing the cardboard base down I used crumpled aluminum foil to cover it and form the 'seafloor'. I also covered it with a layer of ultra thick gesso to smooth out the foil texture and build it up a bit. The house pedestal base I covered with DecoArt Media's Textured Sand Paste.


3. For the roof tiles I used the Village Gingerbread die. I wanted them to look like they were cut from mother of pearl. I had some wild adhesive backed prism film that I thought could work to give the roof tiles some interesting shimmer.


On its own it was way too "disco" so a covered it with several layers of a few different colors of Silks Acrylic Glazes. That toned it down and also added a nice shimmer.

4. The embellishments I altered with crackle paste and paint, paint with stamping and embossing powder.

The diecut seahorses I painted and then covered with Fractured Ice embossing
powder. That stuff is too cool!
5. Back to the base – I spread on a layer of modeling paste and sprinkled it all with fine white sand. As I started placing all the elements, I was sure to work from back to front because it would have been too hard to reach around and get to the back layer with the house etc. in place. I used hot glue to fasten the parts down.


6. I completely finished the house and pedestal so I could place it all as one unit into the lantern.

The mermaid resident has a little crab feeder in her yard.
7. Some of the chipboard embellishments I cut apart and reassembled so they would be
"3-D" and fit better in the space.


Thanks for stopping by and I hope you have a great weekend! Head on over to the MMM challenge post to see some inspiring projects and to join in the challenge yourself. You still have time!

Products used
Lavinia stamp: Alana Mermaid
DecoArt Media Modeling Paste
DecoArt Media Texture Sand Paste
various small shells, coral, sand
PaperArtsy Fresco paint: various colors
UmWowStudios laser cut chipboard pieces
Emerald Creek Embossing Powder: Fractured Ice

Dies
Sizzix Cookie Box
Sizzix Village Brownstone
Sizzix Village Manor
Sizzix Village Bungalow
Sizzix Village Gingerbread
AJVD Fringe Flower


Sizzix links in this post are affiliate links which do not affect the price you pay but allow me to earn a small percentage of a sale. Thanks!

I'm also entering this into the Frilly & Funkie 'In the Good Old Summertime' challenge. Summer makes me think of the beach and all things oceany. (My seasonal mantel decor is all beach themed right now.) The bright colors I used in the project also fit the season. Now I live far away from the beach but I can still visit it in my imagination. ;-)

Monday, July 10, 2017

A Jillian Vance Design Sneak Peek…

Check out the whole thing over at the AJVD blog! I have a fun and festive new card posted and I used some of the new Distress Oxide Inks – love those things!!

mmmm, Oxides…


Have a great week and stay cool! ;-)

Saturday, July 1, 2017

Mixed Media Monthly July Challenge…

Altered Embellishements! This is going to be a fun one! What can you think to do with your own stash of embellies to change them up a bit?

http://mixedmediamc.blogspot.com/2017/06/mixed-media-monthly-challenge-38.html

Our generous sponsor this month is UmWowStudio. The owner sent us all chippies designed by our very own Lynne Forsythe to use for our projects! Join in our challenge and you will have a chance to win a $30 gift certificate plus free shipping at UmWowStudio!

For my project, I altered a binder to use as a garden journal. I still need to organize the inside but at least I have a start with this:


I didn't want to get too dimensional on the cover because it is going to see some use! I think I'm going to spray it with Scotch Guard too to help it repel dirt etc. I started off with making a mist from permanent ink using Eileen Hull's Color Box Blends, color - Leaf (see how HERE). All the materials I've used on this are permanent and waterproof when dry. I used a leaf stencil I have to mist the leaf pattern on the front (and back). For the stamping I used Rubber Dance stamps (see list below) and Ranger Archival Ink.

I cut a plant tag using the Phrase, Bloom & Plant Marker die. I also dug deep into my stash for some Tim Holtz Grungeboard letters to spell the words 'garden'. I altered those with paint and Distress Embossing Powder.

The super cool chippies that Lynne designed I altered with various embossing powders and distressed with archival ink.


I glued them on with super strong glue and added some crackle paste 'dirt' with little glass beads pressed into it for more texture. When it was all dry I colored it with a wash of brown fluid acrylic paint.

Thanks for stopping by and I hope you have a great week! Head on over to the MMM challenge post to see some inspiring projects and meet the two new members of our Design Team. We will be having a really big mid-month post too so keep your eyes open for that on the 15th!

Products used
Rubber Dance stamps:
Beautiful Bugs
Twiggy Leaves
Butterfly Girl #2

Dies
Sizzix Phrase, Bloom & Plant Marker

Sizzix links in this post are affiliate links which do not affect the price you pay but allow me to earn a small percentage of the sale. Thanks!